The maintenance and care of impregnated carbon graphite mainly includes the following aspects:
Daily cleaning: Clean the impregnated carbon graphite parts regularly, use soft brushes, clean cotton cloth and other tools to gently wipe the surface and interior to remove oil and impurities. The cleaning agent should choose a special bearing cleaning agent or solvents such as kerosene, and avoid using highly corrosive cleaning agents.
Lubrication management: Select a suitable lubricant, such as lubricating oil or grease, according to factors such as bearing type, working environment and running speed. The amount of lubrication should be moderate, too much or too little will affect the performance of the bearing. Regularly replace the lubricant, generally filling about 1/3~1/2 of the internal space of the bearing.
Sealing protection: Add a sealing ring or sealing plug during installation to prevent lubricant leakage and effectively block the intrusion of dust and moisture. Check the sealing regularly to ensure that the sealing ring or sealing plug is intact.
Regular inspection and replacement: Regularly check the appearance of the bearing to check for signs of wear, cracks, corrosion, etc. Measure the relevant dimensions and observe the status of the rolling elements and cages. If necessary, replace the worn parts.
Storage and preservation: Store the bearings in a dry, well-ventilated place to avoid moisture and rust. During storage, prevent the bearings from being subjected to heavy pressure and collision.
Precautions for installation and use: Make sure the installation surface is clean and flat before installation, and avoid rough installation with tools such as hammers that may damage the bearings. Avoid overloading during use and ensure that the temperature is within its tolerance range.
Special maintenance: For frequently used graphite products, maintenance agents (such as graphite powder, special lubricants, etc.) can be applied regularly to reduce wear and friction. For graphite products that are not used for a long time, anti-rust treatment should be carried out (such as applying anti-rust agents such as butter).
