Carbon graphite care and maintenance mainly include the following aspects:
Storage environment: Carbon graphite products should be stored in a dry, well-ventilated place, avoid contact with humid air to prevent rust and corrosion. Avoid placing products directly on wet ground or wooden racks to reduce the risk of moisture.
Cleaning and inspection: Before installation, ensure that carbon graphite products and their accessories are clean and free of impurities, check for cracks, wear or other damage, and ensure that the products are intact. For new products, preheating treatment may be required before installation, such as baking in a drying device or furnace to an appropriate temperature (such as 500°C) to remove internal moisture and residual stress.
Lubrication and maintenance: Select appropriate lubricants according to the conditions and requirements of use. Although carbon graphite products have self-lubricating properties, external lubrication is still required in some cases to improve operating efficiency and life. Lubricate regularly to maintain the lubrication state of the product. The lubrication cycle should be determined according to the specific conditions of use and the recommendations of the maintenance manual.
Regular inspection and replacement: Regularly check the appearance, size and performance of carbon graphite products, and replace worn parts. Control the load, optimize the working environment, and prevent shock and vibration. Handle with care during transportation and installation to ensure tight fit.
Control load and working environment: During use, control the temperature within its tolerance range and avoid excessive use, especially in high temperature or high pressure environments. When operating safely, wear appropriate protective equipment to prevent graphite dust from causing harm to the human body.
Special maintenance: For products that need to be used frequently, maintenance agents (such as graphite powder, special lubricants, etc.) can be applied regularly to reduce wear and friction. For products that are not used for a long time, anti-rust treatment (such as applying anti-rust agents such as butter) should be carried out to prevent rust and corrosion.
Record and track: Record and track the use of carbon graphite products, including the number of uses, cleaning and maintenance records, performance inspection results, etc., which will help to find problems in time and take corresponding treatment measures.
